HO Scale Code Line
-
- Saver of all History
- Posts: 4984
- Joined: Wed Oct 27, 2004 10:35 pm
- Location: Feel the Zeel, MI
- Contact:
HO Scale Code Line
I've been acquiring code line poles for my HO Scale layout for some time now. They are still spaced on their molded stands, but I'm getting ready to drill some holes so I can cut off the bases and mount them more perminantly (thus finally ending their falling over every time I walk by.) I realize in cities and narrow places, poles were spaced differently than when there was lots of space out in the open, and I intend to model them that way. However, does anyone know what the standard distance was between code line poles when they were spaced, and what distance that translates to for an HO layout? Thanks!
- cnw8835
- Grain Train Fetish LOLZ
- Posts: 4736
- Joined: Sun Oct 29, 2006 6:19 pm
- Location: Grand Rapids, MI
- Contact:
Model Railroader(2006 "How To Build Realistic Layouts") says that on real railroads the poles are on average 100 to 150 feet apart, no closer than 13 feet from the nearest rail and the bottom wires should be at least 27 feet off the ground (I know that last one isn't always right in real life). So on your layout that translates too 13.7-20.6 inches between poles, 1.8 inches from the nearest rail and 3.7 inches from your ground to the bottom code line.
Getting your pole mounted
What I'd do to mount them is drill a shallow mounting hole say maybe like 1/8 deep the size of the pole. Then with a smaller drill in the center of the mounting hole drill all the way through. In the shank of the pole drill a little hole and glue a piece of string, as you mount the poles pass the string to the underside of the tabletop. Tie a fishing sinker to the string hanging down. This way if you ever bomp your poles they won't break off they'll just lean in and the sinker will upright them again. Worse case you knock it out of the hole, but it won't be broke you just stand it back up.
-
- Saver of all History
- Posts: 4984
- Joined: Wed Oct 27, 2004 10:35 pm
- Location: Feel the Zeel, MI
- Contact:
Thanks guys for your replies. Jon, I don't know why I didn't look in that Model Railroader in the first place, my copy is just sitting on the shelf. But thanks for doing all the math for me. I know that if you space the poles slightly closer together, it gives a greater impression of distance, so I'm going to go a bit closer that the 100 foot average and shoot for closer to 70 feet. ESPRRFAN, that's a very innovative idea. I think I'll give it a shot on a couple of poles and see how it works. Gotta find my tackle box for some line and sinkers . I'll take some photos when the project is done and let you know how it turned out. If anyone else has any input, please feel free to share!
At our club, we drill a small hole, just smaller than the diameter of the telephone pole. We cut the base of the telephone pole off, and run it in a pencil sharpener (just to give it a tiny bit of taper). Then you can push it in the hole easily, and usually, it'll pop out if you bump it. Although if you make it too tight, it will snap off.