Looked like there are quite a few cars in Ensel right now, spread over 5 separate tracks, each rather full. If 708 is still out, it might be 335's power that is sitting out there.BL2-1843 wrote:Last I heard after crew #3 was onboard, (just to get the train beyond Ann Pere) that this crew was to tie the train down at Ensel and would have to put the 155 cars into two different tracks there.cnw8835 wrote:D801 Does anyone know if yesterday's Q335 made it all the way to GR or if they tied down somewhere outside of town?
CSX Train Location Updates: 4/20/12.
-
- Railroadfan...fan
- Posts: 467
- Joined: Fri Feb 22, 2013 11:07 am
- Location: Ensel, Lansing, MI
- Contact:
Re: CSX Train Location Updates: 4/20/12.
- amtrak1007
- MP 25 Productions Co-Founder
- Posts: 2979
- Joined: Wed Apr 12, 2006 12:55 am
- Location: Fisher FB97
- Contact:
Re: CSX Train Location Updates: 4/20/12.
Y10220 building a 334? Or at least a train with bunch of cars for Toledo.brysonda wrote:Looked like there are quite a few cars in Ensel right now, spread over 5 separate tracks, each rather full. If 708 is still out, it might be 335's power that is sitting out there.BL2-1843 wrote:Last I heard after crew #3 was onboard, (just to get the train beyond Ann Pere) that this crew was to tie the train down at Ensel and would have to put the 155 cars into two different tracks there.cnw8835 wrote:D801 Does anyone know if yesterday's Q335 made it all the way to GR or if they tied down somewhere outside of town?
Also it was mentioned W-99017? Will have a high/wide on it.
I just left for bubble island after getting bored watching the 4036 go back and forth.
- Tlout
- WZZM's "train expert"
- Posts: 7451
- Joined: Tue Oct 09, 2007 10:34 am
- Location: Holland
- Contact:
Re: CSX Train Location Updates: 4/20/12.
BNSF 9407, 6384 with empties south at Riley St. Holland 6:34 PM.
- SD80MAC
- Ingersoll's Mr. Michigan
- Posts: 10669
- Joined: Thu Mar 10, 2005 4:59 pm
- Location: Grand Rapids
Re: CSX Train Location Updates: 4/20/12.
Not slug sets, just 2 GP38-2s and 2 RCPHG4 drones. You do know drones are not slugs, right? Slugs have traction motors, drones are motorless, engineless shells.MQT3001 wrote:Looks like two slug sets to me. Wonder if they're running from the flood? Water can't be far from burying the rails in Grandvillecnw8835 wrote:A bit late to help some people but Q327 went west from GR about an hour ago. CSX 7557, UP 2025, CSX 9249, 2659, 2692 & 9156. It sounded like at least one, maybe two, of the GeeP's was to be setout at Holland.
"Remember, 4 mph is a couple, 5's a collision!"
http://flickriver.com/photos/conrail680 ... teresting/
http://flickriver.com/photos/conrail680 ... teresting/
- Tlout
- WZZM's "train expert"
- Posts: 7451
- Joined: Tue Oct 09, 2007 10:34 am
- Location: Holland
- Contact:
Re: CSX Train Location Updates: 4/20/12.
BNSF 8893, 6153 lite south at Riley St. Holland 7:22 PM.
-
- Saginaw Sub Foamer
- Posts: 4099
- Joined: Sun Oct 30, 2011 1:54 pm
- Location: None of your business......
Re: CSX Train Location Updates: 4/20/12.
What I think is D737 is going through Grand Blanc right now northbound with CSX 6907, CSX 2311(?) two covered hoppers, a box car, and a tank car.
New Youtube page: https://www.youtube.com/channel/UCc5AC6 ... E7wQUw-reQ
-
- Railroadfan...fan
- Posts: 467
- Joined: Fri Feb 22, 2013 11:07 am
- Location: Ensel, Lansing, MI
- Contact:
Re: CSX Train Location Updates: 4/20/12.
4036 is still at it in Ensel. Looks like 4049 and a BC Rail are sitting facing eastbound. Was that the power on the ill-fated 335?
- Saturnalia
- Authority on Cat
- Posts: 15451
- Joined: Wed Sep 28, 2011 7:54 pm
- Location: Michigan City, IN
- Contact:
Re: CSX Train Location Updates: 4/20/12.
Guess I always assumed they were slugs.SD80MAC wrote:Not slug sets, just 2 GP38-2s and 2 RCPHG4 drones. You do know drones are not slugs, right? Slugs have traction motors, drones are motorless, engineless shells.MQT3001 wrote:Looks like two slug sets to me. Wonder if they're running from the flood? Water can't be far from burying the rails in Grandvillecnw8835 wrote:A bit late to help some people but Q327 went west from GR about an hour ago. CSX 7557, UP 2025, CSX 9249, 2659, 2692 & 9156. It sounded like at least one, maybe two, of the GeeP's was to be setout at Holland.
- SD80MAC
- Ingersoll's Mr. Michigan
- Posts: 10669
- Joined: Thu Mar 10, 2005 4:59 pm
- Location: Grand Rapids
Re: CSX Train Location Updates: 4/20/12.
Your buddy on Youtube constantly refers to them as slugs, too. Better inform him too
"Remember, 4 mph is a couple, 5's a collision!"
http://flickriver.com/photos/conrail680 ... teresting/
http://flickriver.com/photos/conrail680 ... teresting/
Re: CSX Train Location Updates: 4/20/12.
4049 and the BC Rail unit WAS the power on 335 yesterday, but both units were facing west. D708 with CSX 8447 and five car still sits in Fowlerville.brysonda wrote:4036 is still at it in Ensel. Looks like 4049 and a BC Rail are sitting facing eastbound. Was that the power on the ill-fated 335?
- Saturnalia
- Authority on Cat
- Posts: 15451
- Joined: Wed Sep 28, 2011 7:54 pm
- Location: Michigan City, IN
- Contact:
Re: CSX Train Location Updates: 4/20/12.
Guess I shouldSD80MAC wrote:Your buddy on Youtube constantly refers to them as slugs, too. Better inform him too
What is the purpose of them if they are not powered? I guess I am missing something...
-
- The Beast
- Posts: 5934
- Joined: Fri Dec 08, 2006 1:28 pm
Re: CSX Train Location Updates: 4/20/12.
Not sure if it's G796, but there was a loaded grain train still at Lilley Road as on 7:45pm, saw it from I-275
Re: CSX Train Location Updates: 4/20/12.
Q32220 by Palmer Road Westland 20:25
-
- Railroadfan...fan
- Posts: 467
- Joined: Fri Feb 22, 2013 11:07 am
- Location: Ensel, Lansing, MI
- Contact:
Re: CSX Train Location Updates: 4/20/12.
Ack, I meant westbound. Silly autocorrect.BL2-1843 wrote:4049 and the BC Rail unit WAS the power on 335 yesterday, but both units were facing west. D708 with CSX 8447 and five car still sits in Fowlerville.
Re: CSX Train Location Updates: 4/20/12.
I was out in Grandville this evening and by my estimation, the tracks will be facing zero threat from the water. It appears that the water is surging outward, not upward from Buck Creek. The water level on the Buck Creek bridge was the same as when I photographed it yesterday. However, many of the streets in Grandville have more water on them. That tells me the water is pushing outward, spreading as it goes, not upward.MQT3001 wrote: Looks like two slug sets to me. Wonder if they're running from the flood? Water can't be far from burying the rails in Grandville
https://www.flickr.com/photos/jimthias/
GRHC - you know every night I can imagine he is in front of his computer screen sitting in his underwear swearing profusely and drinking Blatz beer combing the RailRoadFan website for grammatical errors.
GRHC - you know every night I can imagine he is in front of his computer screen sitting in his underwear swearing profusely and drinking Blatz beer combing the RailRoadFan website for grammatical errors.
Re: CSX Train Location Updates: 4/20/12.
P370-20 departed Holland Depot around 9:20pm.
From what I could see, the lead unit was AMTK 90368 and the rear unit was AMTK 195.
From what I could see, the lead unit was AMTK 90368 and the rear unit was AMTK 195.
Jeff O.
Celebrating over 11 years dial-up free!
(18:36:45) MagnumForce: Railfanning is way more fun when you stop caring about locomotives and signals
(19:11:29) cbehr91: I can't believe I'm +1ing Brent but +1
Celebrating over 11 years dial-up free!
(18:36:45) MagnumForce: Railfanning is way more fun when you stop caring about locomotives and signals
(19:11:29) cbehr91: I can't believe I'm +1ing Brent but +1
Re: CSX Train Location Updates: 4/20/12.
Going to GR? They must be tying up in Wyoming yard then. Hmmm...that means I might have a plan for the morning (and it has something to do with my photo above).Jochs wrote:P370-20 departed Holland Depot around 9:20pm.
From what I could see, the lead unit was AMTK 90368 and the rear unit was AMTK 195.
https://www.flickr.com/photos/jimthias/
GRHC - you know every night I can imagine he is in front of his computer screen sitting in his underwear swearing profusely and drinking Blatz beer combing the RailRoadFan website for grammatical errors.
GRHC - you know every night I can imagine he is in front of his computer screen sitting in his underwear swearing profusely and drinking Blatz beer combing the RailRoadFan website for grammatical errors.
- Saturnalia
- Authority on Cat
- Posts: 15451
- Joined: Wed Sep 28, 2011 7:54 pm
- Location: Michigan City, IN
- Contact:
Re: CSX Train Location Updates: 4/20/12.
I'd take a listen to the scanner, they "departed" Holland last night to bury themselves in Waverly. I guess the question for Jochs is if he saw any buses or not...Amtrak.com shows service disruption...J T wrote:Going to GR? They must be tying up in Wyoming yard then. Hmmm...that means I might have a plan for the morning (and it has something to do with my photo above).Jochs wrote:P370-20 departed Holland Depot around 9:20pm.
From what I could see, the lead unit was AMTK 90368 and the rear unit was AMTK 195.
- amtrak1007
- MP 25 Productions Co-Founder
- Posts: 2979
- Joined: Wed Apr 12, 2006 12:55 am
- Location: Fisher FB97
- Contact:
Re: CSX Train Location Updates: 4/20/12.
Think of them as a large remote control receiver. It makes it so that CSX didn't have to dedicate powered units to have the remote control hardware... They also did that with a few beat cars to do the exact same thing, only these units didn't have enough weight to stay on the rails in the winter, and also didn't have a way to keep the air lines dry(?) or some such other problem. They were stored in Muskegon until that yard was leased out... I think they went back to Waycross, but I really didn't pay much attention to where they went.MQT3001 wrote:Guess I shouldSD80MAC wrote:Your buddy on Youtube constantly refers to them as slugs, too. Better inform him too
What is the purpose of them if they are not powered? I guess I am missing something...
JT/3001 - P370 tying up in WAVERLY read the thread racer...