GTW Grand Rapids Sub Old Signals
GTW Grand Rapids Sub Old Signals
Does anyone know where any old signal/Control Point locations GTW had on the Grand Rapids Sub? The only signals that are left (I believe) are at Fuller Jct on the GRE.
- justalurker66
- Railroadfan...fan
- Posts: 1989
- Joined: Tue Feb 15, 2011 2:51 am
Re: GTW Grand Rapids Sub Old Signals
Multimodalways has a 1974 timetable available ... how much is left is a good question.
http://www.multimodalways.org/docs/rail ... 8-1974.pdf
http://www.multimodalways.org/docs/rail ... 8-1974.pdf
-
- Railroadfan...fan
- Posts: 86
- Joined: Sun May 27, 2012 8:30 pm
- Location: Grand Rapids, MI
Re: GTW Grand Rapids Sub Old Signals
Those signals are the last ones on that line, pretty much the only searchlights left on CSX around GR until you get east of Lake Odessakd_1014 wrote:Does anyone know where any old signal/Control Point locations GTW had on the Grand Rapids Sub? The only signals that are left (I believe) are at Fuller Jct on the GRE.
Look, Listen, Live. Always.
- Saturnalia
- Authority on Cat
- Posts: 15448
- Joined: Wed Sep 28, 2011 7:54 pm
- Location: Michigan City, IN
- Contact:
Re: GTW Grand Rapids Sub Old Signals
According to the timetable posted above, looks like it was mostly TT&TO operations, with the exception of a few junctions, which would make sense, as it was never really busy enough to warrant signal control.kd_1014 wrote:Does anyone know where any old signal/Control Point locations GTW had on the Grand Rapids Sub? The only signals that are left (I believe) are at Fuller Jct on the GRE.
- SD80MAC
- Ingersoll's Mr. Michigan
- Posts: 10658
- Joined: Thu Mar 10, 2005 4:59 pm
- Location: Grand Rapids
Re: GTW Grand Rapids Sub Old Signals
The line was never fully signaled north (west) of Durand. Signals protected interlocking plants like Malta (Lowell, Pere Marquette diamond) and Fuller, and I believe there were signals at Penn Jct. as well. While I believe Fuller was controlled by the Fuller operator, Malta was an automatic plant, served on a first come, first serve basis. Everything else was run by timetable and or train orders.
"Remember, 4 mph is a couple, 5's a collision!"
http://flickriver.com/photos/conrail680 ... teresting/
http://flickriver.com/photos/conrail680 ... teresting/
Re: GTW Grand Rapids Sub Old Signals
Owosso Jct. (PC) and the C&O diamond (0.4 mile e. of Ionia) also were signaled, and the ETT states that "movement is by signal indication" on the joint stretch with C&O in Grand Haven.
There's also the new signal in Durand at Main St., by track that back in the day was technically on the Grand Rapids Sub.
There's also the new signal in Durand at Main St., by track that back in the day was technically on the Grand Rapids Sub.
Re: GTW Grand Rapids Sub Old Signals
Thanks everyone for the info! Were the signals that protected Malta searchlights?
- SD80MAC
- Ingersoll's Mr. Michigan
- Posts: 10658
- Joined: Thu Mar 10, 2005 4:59 pm
- Location: Grand Rapids
Re: GTW Grand Rapids Sub Old Signals
This is the first crossing east of Malta, circa 1987. Appears to be searchlights.kd_1014 wrote:Thanks everyone for the info! Were the signals that protected Malta searchlights?
"Remember, 4 mph is a couple, 5's a collision!"
http://flickriver.com/photos/conrail680 ... teresting/
http://flickriver.com/photos/conrail680 ... teresting/
Re: GTW Grand Rapids Sub Old Signals
That reminds me. The signals for the swing bridge over the Spring Lake chanel were of the triangle light configuration. One is on display in front of PM 1223.Steve B wrote: the ETT states that "movement is by signal indication" on the joint stretch with C&O in Grand Haven.
Re: GTW Grand Rapids Sub Old Signals
Steve here's a March 1975 picture of the GTW signal protecting the C&O crossing in Ionia. I think its a Charlie Whipp or Charlie G. Jr. pic
- MQT1223
- O Scale Railfanner
- Posts: 4149
- Joined: Wed Sep 10, 2014 1:46 pm
- Location: Grandville, Michigan
- Contact:
Re: GTW Grand Rapids Sub Old Signals
Any idea what direction this photo is facing and what street that is in the foreground?jrgerber wrote:Steve here's a March 1975 picture of the GTW signal protecting the C&O crossing in Ionia. I think its a Charlie Whipp or Charlie G. Jr. pic
Did the GTW have any passing sidings with signals or was it all manual?
1223 OUT! President and Founder of the Buck Creek Central, the Rolling River Route! (2012-2017) President and Founder of the Lamberton Valley Railroad, The Tin Plate Road! Proudly railfanning with Asperger's since 1996.
Re: GTW Grand Rapids Sub Old Signals
Its looking east towards American Bumper the boxcars in the sidings are probably for them
- SD80MAC
- Ingersoll's Mr. Michigan
- Posts: 10658
- Joined: Thu Mar 10, 2005 4:59 pm
- Location: Grand Rapids
Re: GTW Grand Rapids Sub Old Signals
As mentioned, the only signals on the GR Sub were automatic interlockings or controlled by the railroad they were crossing (or the operator). All switches would have been hand throws.MQT1223 wrote:Any idea what direction this photo is facing and what street that is in the foreground?jrgerber wrote:Steve here's a March 1975 picture of the GTW signal protecting the C&O crossing in Ionia. I think its a Charlie Whipp or Charlie G. Jr. pic
Did the GTW have any passing sidings with signals or was it all manual?
"Remember, 4 mph is a couple, 5's a collision!"
http://flickriver.com/photos/conrail680 ... teresting/
http://flickriver.com/photos/conrail680 ... teresting/
- C&O Dispatcher
- Railroadfan...fan
- Posts: 279
- Joined: Tue Jun 10, 2008 6:02 pm
Re: GTW Grand Rapids Sub Old Signals
That small shanty at the diamond in Ionia contained a small interlocking machine, operated by C&O trainmen. The signals were normally "clear" for the GTW. There were derails with STOP signs on the C&O side. A C&O crew member would operate a lever in the shanty to set the signals to stop on the GTW and then had to wait a set time (I don't recall how many minutes) before they could operate a lever to lift the derails for their movement. Back in 1976-77 I worked a C&O mobile agent job a few times that was headquartered at Lowell, and had to take a switch list and waybills every day down to the diamond at Ionia for the local out of Ensel. I'm fairly familiar with the GTW Grand Rapids Sub (except the west end) and spent many hours with the agent at St Johns back in the 1960's.
Re: GTW Grand Rapids Sub Old Signals
If you got any pictures from those days I am sure we would all love to see them.
Re: GTW Grand Rapids Sub Old Signals
I remember you could always tell when the C&O was in Ionia because the top red light was much brighter than the lower red light on the eastbound GTW signal at the diamond. The signal remained that way until the C&O left town. My question is, what would have happened if a GT train came along. Would the signal have cleared, or would the GT crew have had to go into the shanty to clear the signal? And if the GT crew cleared the signal how would the C&O crew know? It's conceivable if they were switching between the buildings at General Tire they may not know.
- C&O Dispatcher
- Railroadfan...fan
- Posts: 279
- Joined: Tue Jun 10, 2008 6:02 pm
Re: GTW Grand Rapids Sub Old Signals
I presume that when the C&O crew arrived at the diamond they communicated with the GTW dispatcher via the track side phone to determine if the GTW would have anything in the area while they did their work and could leave the derails off until they went back east toward Gd Ledge. Otherwise, they would have locked things back up while doing their work in town. The timetable instructions called for them to restore everything to normal as soon as they cleared in either direction. (I couldn't find any instructions in the GTW timetables regarding the crossing at Ionia other than showing it as an unattended interlocking). At any rate, the C&O crew would still have to observe their STOP sign at the diamond and observe whether the derails were on or off.
- Doktor No
- Railroadfan...fan
- Posts: 1088
- Joined: Wed Feb 04, 2015 4:49 pm
- Location: Rockford, Michigan
Re: GTW Grand Rapids Sub Old Signals
From the April 26, 1964 C&O ETT: "IONIA-Crossing of Iona (sp) Sub and GTW is governed by derail target with yellow switch lamp. Instructions posted in tower." Its the same instruction in the Oct. 25, 1970 ETT. They did correct the IONIA spelling though.
I never got to work that sub past the elevator at Grand Ledge but did snoop Ionia back in the late 70's when everything was still there in town.
I never got to work that sub past the elevator at Grand Ledge but did snoop Ionia back in the late 70's when everything was still there in town.
Curb Your Enthusiasm.
- C&O Dispatcher
- Railroadfan...fan
- Posts: 279
- Joined: Tue Jun 10, 2008 6:02 pm
Re: GTW Grand Rapids Sub Old Signals
1981 Timetable: "Ionia: To cross GTW Railroad crew will determine GTW train or engine not fouling or approaching crossing; normal signal levers Nos 1 and 3; wait 3 minutes and 30 seconds and reverse derail lever No 2 to remove derails and proceed. After clearing opposing derail, crew will normal lever No 2; reverse levers Nos 3 and 1." I do remember there were also STOP signs ahead of the derails.