n scale gladstone yard
n scale gladstone yard
Here is my current version of gladstone yard. It is based on a LDE found in the Model Railroad Frieght Yards book. I made a few changes like eliminating the turntable to make room for a larger diesel maintainence facility. Most everything else is copied from the book. The layout is 14' long by 2' wide. the closet area used for staging is 7' long by 4' wide. I haven't quite figured out how I going to use the staging area yet. All track is down except in staging but not yet wired for operation. The track is all peco code 80 with peco insul frog turnouts. I'll be using Prodigy Advance 2 DCC. Any comments, suggestions or ideas would be greatly appreciated.....
http://railroadfan.com/gallery/displayi ... pos=-52416
http://railroadfan.com/gallery/displayi ... pos=-52417
http://railroadfan.com/gallery/displayi ... pos=-52418
http://railroadfan.com/gallery/displayi ... pos=-52416
http://railroadfan.com/gallery/displayi ... pos=-52417
http://railroadfan.com/gallery/displayi ... pos=-52418
Re: n scale gladstone yard
By not using the Turntable, I beleive you lost some of the Character of the yard, however, It looks really nice
Re: n scale gladstone yard
I thought about what you said about the turntable and I might just be able to fit one in......just above the east ladder coming off the one track that leads to the diesel shop.....here are a few pics to show what I might try..paper plate obviously is the stand in for the turntable..better character for the yard?
http://railroadfan.com/gallery/displayi ... pos=-52423
http://railroadfan.com/gallery/displayi ... pos=-52422
http://railroadfan.com/gallery/displayi ... pos=-52423
http://railroadfan.com/gallery/displayi ... pos=-52422
Re: n scale gladstone yard
Much better, Its been a very long time since I've been to Gladstone but one of the things I distinctly remembered was that they still had the turntable and they still used it. I'm going to guess that your layout is going to be a point to point based on the CNW/WC/CN Yard in Gladstone?
Re: n scale gladstone yard
You're mostly correct on the layout being point to point....the closet area is staging right now but it would be a great place for a helix to give me a two deck layout.....the west end of the yard has to turn due to room constraints, but my thought was to continue that to a center peninsula then to the other side of the room where I would model Wells, MI and even some part of Escanaba........then I could also justify E & LS locomotives maybe even their little shop area......................if you're going to dream,,,,,,,,DREAM BIG!!
- AARR
- Incognito and Irrelevant
- Posts: 39029
- Joined: Wed Dec 22, 2004 7:39 pm
- Location: Washington, MI
Re: n scale gladstone yard
rdenman62, will you model that paper plant near Groos?
PatC created a monster, 'cause nobody wants to see Don Simon no more they want AARR I'm chopped liver, well if you want AARR this is what I'll give ya, bad humor mixed with irrelevant info that'll make you roll your eyes quicker than a ~Z~ banhammer...
Re: n scale gladstone yard
yes I was planning on doing that...thought it would be an excellent industry to give some operational variety to the layout.....without looking at my map, i believe it also is a interchange point for els & cn and also the cn ore sub crosses just to the east of the plant. am I correct or do I have some thing mixed up?
- AARR
- Incognito and Irrelevant
- Posts: 39029
- Joined: Wed Dec 22, 2004 7:39 pm
- Location: Washington, MI
Re: n scale gladstone yard
I believe you're pretty accurate, rdenman62. I don't know what the traffic is like now but at one time not that long ago I think that plant was good for around 40 cars a day of inbound clay slurry, coal, limestone slurry, pulp wood, and other chemcials and outbound paper and wood pulp.
PatC created a monster, 'cause nobody wants to see Don Simon no more they want AARR I'm chopped liver, well if you want AARR this is what I'll give ya, bad humor mixed with irrelevant info that'll make you roll your eyes quicker than a ~Z~ banhammer...
Re: n scale gladstone yard
Thanks, I didn't know traffic density to the paper mill. Problem is now is how to incorporate the crossing of the ore sub with the manistique sub with the els interchange the paper mill yard and all the other goodies I got to have...oh lets not forget the els shop area too......
Re: n scale gladstone yard
ok here is a quick sketch of the layout I'm doing,,it isn't set in stone except the gladstone yard area,,,nothing else is set yet,,,,input ,,comments ,,changes are welcome.......
http://railroadfan.com/gallery/displayi ... pos=-52466
http://railroadfan.com/gallery/displayi ... pos=-52466
- AARR
- Incognito and Irrelevant
- Posts: 39029
- Joined: Wed Dec 22, 2004 7:39 pm
- Location: Washington, MI
Re: n scale gladstone yard
I'm not familiar enough with the area to comment on your accuracy but it seems to me you've captured the "essence" of the area. Will yu have staging yards?
PatC created a monster, 'cause nobody wants to see Don Simon no more they want AARR I'm chopped liver, well if you want AARR this is what I'll give ya, bad humor mixed with irrelevant info that'll make you roll your eyes quicker than a ~Z~ banhammer...
Re: n scale gladstone yard
yes I will have some staging....the "closet area" will have staging and possible a helix.....there will be a lower level for the ore subdivision for trains that will enter for that session...it will consist of loaded ore cars from the mines to the dock( staging),,then pick up empties to return to the mines...staging area is Trout Lake/Sault Ste Marie in closet......the other end will be Escanaba staging,,,,,modeled area is from gladstone,mi to wells,mi...
-
- RedNeck Train Chaser
- Posts: 4149
- Joined: Sat Jul 30, 2005 8:42 pm
- Location: Buffalo Location
- Contact:
Re: n scale gladstone yard
I'll be around the area, would you like some pictures of the yard?
Re: n scale gladstone yard
that would be great.....get as many as you can......thanks
- AARR
- Incognito and Irrelevant
- Posts: 39029
- Joined: Wed Dec 22, 2004 7:39 pm
- Location: Washington, MI
Re: n scale gladstone yard
Staging is good. Helix is...mine's been a booger but I supposed when I'm done I'll be glad I have it
PatC created a monster, 'cause nobody wants to see Don Simon no more they want AARR I'm chopped liver, well if you want AARR this is what I'll give ya, bad humor mixed with irrelevant info that'll make you roll your eyes quicker than a ~Z~ banhammer...
Re: n scale gladstone yard
Progress on the Gladstone Yard layout is progressing. Track has been wired for operation and runs great. Room has been painted and really changes the overall view. I also painted the track and it turned out pretty good. Now I'll go back and do some fine touch up like adding some more rust to the rails. here are some pictures showing the progress. now I know the locomotives in the pictures are not the right roadnames but they'll soon all end up in the paint shop....the pics were taken by my better half as she was trying out her new digital camera
http://railroadfan.com/gallery/displayi ... pos=-52562
http://railroadfan.com/gallery/displayi ... pos=-52561
http://railroadfan.com/gallery/displayi ... pos=-52560
http://railroadfan.com/gallery/displayi ... pos=-52559
http://railroadfan.com/gallery/displayi ... pos=-52562
http://railroadfan.com/gallery/displayi ... pos=-52561
http://railroadfan.com/gallery/displayi ... pos=-52560
http://railroadfan.com/gallery/displayi ... pos=-52559
Re: n scale gladstone yard
That BNSF SD9 look familar
Re: n scale gladstone yard
sure does....must of been transfered to burn off some hours heh? it won't be that way for long..thinking about sending her to the paint shop for conversion to DMIR......
-
- RedNeck Train Chaser
- Posts: 4149
- Joined: Sat Jul 30, 2005 8:42 pm
- Location: Buffalo Location
- Contact:
Re: n scale gladstone yard
Actually BNSF, UP, CR, NS and CSX power have shown up in Gladstone in the winters when the WC (CN) would run ore from the DMIR to the dock in Escanaba since the locks were closed. Several times the locos made it up to the mines on the SORE trains and on 411 and 412. I shall go look to see if the Ore Yard has the all rail cars in it this year. I believe they stopped that move a year or so ago.
Re: n scale gladstone yard
update on progress here.....the only thing that has gotten done has been installing decoders in all my locomotives..current roster includes 2 GP38, 3 GP40-2, 2 SD45, 2 SD40, 1 SD35, 5 SD50, 4 SD9...all have decoders except for the 5 SD50......I know CN/WC doesn't have SD50, except for the "SD50F" correct? Too expensive to covert these with Kaslo Shops shells,,,,maybe I should change roads? Maybe Chessis System? But I like the upper peninsula of Michigan.....I think I'm having issues deciding which way to go.........................WC, CN, Chessie.....SOO,,,,,,,